Accessories Pressure Sensors

We offer a wide range of accessories for our AMS pressure sensors to simplify the setup, the evaluation, the programming and also the data acquisition using our sensors. The accessories include evaluation kits (USB starter kits, Arduino kits), pressure hoses and fittings (hose nipples and push-in adapters) and connection cables.

Evaluation Kits

Analog Microelectronics offers various evaluation kits (USB Starter Kits, Arduino Kits) for its board mount pressure sensor series. These kits are suitable for quick and easy setup in the prototyping phase, but also for data acquisition or troubleshooting.

USB Starter Kits

USB Starter Kits are available for the board mount pressure sensor series AMS 5915, AMS 6915, AMS 5812 und AMS 5105. The type-specific USB kits allow an easy and fast evaluation of a pressure sensor from the respective series using a standard Windows PC with USB port. The starter kit enables the readout of the sensor’s digital pressure and temperature values, the inspection of the sensor’s function and data logging. In addition, the USB Starter Kit can be used to change the sensor’s I2C address to an individual address. This individual I2C address is mandatory for the operation of several pressure sensors from the same series on one I2C bus.
The USB Starter Kits consist of two printed circuit boards (PCBs) and software for a Windows PC (suitable for Windows XP, 7 or 10). The respective sensor is mounted on the Starter Kit without soldering using a ZIF socket. The Starter Kit and the sensor are powered via the USB port.

Product
AMS 5105 USB Starter Kit

AMS 5105 USB Starter Kit

  • Quick and easy usage of sensors / pressure switches from the AMS 5105 series using a Windows PC with USB port
  • Visualization of the sensor’s measurement values
  • Configuration of the sensor’s switching outputs (switching function, threshold, delay, hysteresis)
  • Functional test of the sensor

Details Further information
AMS 5812 USB Starter Kit

AMS 5812 USB Starter Kit

  • Quick and easy usage of sensors from the AMS 5812 series using a Windows PC with an USB port
  • Visualization and recording of the measured digital pressure and temperature data
  • Functional test of the sensor / troubleshooting
  • Programming of an individual secondary I2C-address

Details Further information
AMS 5915 USB Starter Kit

AMS 5915 USB Starter Kit

  • Quick and easy usage of sensors from the AMS 5915 series using a Windows PC with an USB port
  • Visualization and recording of the measured digital pressure and temperature data
  • Programming of an individual I2C-address
  • Functional test of the sensor / troubleshooting

Details Further information
AMS 6915 USB Starter Kit

AMS 6915 USB Starter Kit

  • Quick and easy usage of sensors from the AMS 5915 series using a Windows PC with an USB port
  • Visualization and recording of the measured digital pressure and temperature data
  • Programming of an individual I2C-address
  • Functional test of the sensor / troubleshooting

Details Further information

Arduino Kits and Evaluation Boards

With our Arduino kits and evaluation boards using our board-mount pressure sensors from the AMS 5812, AMS 5915 and AMS 6915 families together with the two most popular Arduino variants, the Arduino Uno and the Arduino Nano, is very easy!
For this purpose we offer type-specific Arduino Evaluation Boards (PCB sets), which are used to connect the corresponding pressure sensor to the Arduino Uno or Nano without soldering. Our free program library AMS Arduino Library (AMS.zip) for Arduino’s integrated development environment (IDE) contains the necessary functions for data readout and an immediately usable and compliable sample code. The usage of the AMS Arduino Library and the necessary modifications in the sample code are described in the corresponding reference.

 

Evaluation Boards for Arduino Uno

Product
AMS 5812 Arduino PCB

AMS 5812 Arduino PCB

  • Shield for Arduino Uno, which can be used for data acquisition with the AMS 5812
  • Allows the readout of AMS 5812’s digital pressure and temperature data
  • Compatible with the AMS library (AMS.zip) for Arduino’s IDE
  • Ready for immediate use after mounting an AMS 5812, no further components required

Details Further information
AMS 5915 Arduino PCB

AMS 5915 Arduino PCB

  • Shield for Arduino Uno, which can be used for data acquisition with the AMS 5915
  • Allows the readout of AMS 5915’s digital pressure and temperature data
  • Compatible with the AMS library (AMS.zip) for Arduino’s IDE
  • Ready for immediate use after mounting an AMS 5915, no further components required

Details Further information

Arduino Nano Kits

 

Product
AMS 5812 Arduino Nano Kit

AMS 5812 Arduino Nano Kit

  • Kit for the usage of an AMS 5812 with an Arduino Nano
  • Allows the readout of AMS 5812’s digital pressure and temperature data
  • Compatible with the AMS library (AMS.zip) for Arduino’s IDE
  • Ready for immediate use after mounting an AMS 5812, no further components required

Details Further information
AMS 5915 Arduino Nano Kit

AMS 5915 Arduino Nano Kit

  • Kit for the usage of an AMS 5915 with an Arduino Nano
  • Allows the readout of AMS 5915’s digital pressure and temperature data
  • Compatible with the AMS library (AMS.zip) for Arduino’s IDE
  • Ready for immediate use after mounting an AMS 5915, no further components required

Details Further information

Hoses and Fittings

 

Pressure Hoses

Here we offer you a selection of suitable pressure hoses for our AMS pressure sensors, pressure sensor modules and pressure transmitters. If you cannot find a suitable hose for your application, please contact us at sales@brilliantelectronics.com. We will be glad to assist you.

Order Number Product
Silicon-Tubing-1-3

Silicone Tubing for the AMS 691x Series

  • Material: Silicone
  • Inner diameter: 1.6 mm, outer diameter: 3.2 mm
  • Temperature range: -40 °C up to 125 °C
  • Maximum working pressure: 3 bar
Silicon-Tubing-2-6

Silicone Tubing for the AMS 271x and AMS 5xxx Series

  • Material: Silicone
  • Inner diameter: 2 mm, outer diameter: 6 mm
  • Temperature range: -40 °C up to 125 °C
  • Maximum working pressure: 2 bar
Silicon-Tubing-3-6

Silicone Tubing for the AMS 471x Series

  • Material: Silicone
  • Inner diameter: 3 mm, outer diameter 6 mm
  • Temperature range: -40 °C up to 125 °C
  • Maximum working pressure: 2 bar
Nylon-Tubing-3-5

Nylon PA Tubing for the AMS 271x and AMS 5xxx Series

  • Material: Nylon Polyamide (PA)
  • Inner diameter: 3 mm, outer diameter: 5 mm
  • Temperature range: -10 °C up to 80 °C
  • Maximum working pressure: 41 bar at 20 °C and 20 bar at 80 °C
  • Minimum bending radius: 25 mm
PA-Tubing-3-5

PA Tubing for the AMS 271x and AMS 5xxx Series

  • Material: Polyamide (PA)
  • Inner diameter: 3 mm, outer diameter: 5 mm
  • Temperature range: -40 °C up to 80 °C
  • Maximum working pressure: 33 bar at 20 °C and 16 bar at 80 °C
  • Minimum bending radius: 20 mm
PU-Tubing-3-4

PU Tubing for the AMS 271x and AMS 5xxx Series

  • Material: Polyurethane (PU)
  • Inner diameter: 3 mm, outer diameter: 4.3 mm
  • Temperature range: -35 °C up to 60 °C
  • Maximum working pressure: 12 bar at 20 °C and 6 bar at 60 °C
  • Minimum bending radius: 15 mm
PU-Tubing-4-6

Soft Polyurethane Tubing for the AMS 471x Series

  • Material: Polyurethane (PU)
  • Inner diameter: 4 mm, outer diameter: 6 mm
  • Temperature range: -20 °C up to 60 °C
  • Maximum working pressure: 6 bar bei 20 °C
  • Minimum bending radius: 15 mm

 

Barb Fittings, Hose Nipples and Push-In Fittings

For the pressure transmitters from the AMS 3011 and AMS 3012 series we offer a selection of suitable pressure connectors (barb fittings, hose nipples, push-in fittings) used to connect pressure hoses / tubing pressure-tight to the sensor’s metal package. For any further questions please contact us at sales@brilliantelectronics.com. We will be glad to assist you.

Barb Fittings

 

 

Order Number Product
BARB-FITTING-3

M5 Barb Fitting for the AMS 301x Series

  • Nominal width: 2.5 mm
  • Temperature range: 0 °C up to 60 °C
  • Pressure range: -0.95 up to 10 bar
BARB-FITTING-4

M5 Barb Fitting for the AMS 301x Series

  • Nominal width: 4 mm
  • Maximum working pressure: 16 bar

 

Hose Nipples

 

Order Number Product
HOSE-NIPPLE-4

M5 Hose Nipple with Cap Nut for the AMS 301x Series

  • Suitable for plastic hoses with ∅ = 2.4 / 4 mm
  • Maximum working pressure: up to 15 bar
HOSE-NIPPLE-6

M5 Hose Nipple with Cap Nut for the AMS 301x Series

  • Suitable for plastic hoses with ∅ = 4 / 6 mm
  • Maximum working pressure: up to 15 bar

 

Push-In Fittings

Order Number Product
PUSHIN-FITTING-3

M5 Push-In Fitting for the AMS 301x Series

  • Suitable for plastic hoses with ∅OD = 3 mm
  • Temperature range: -10 °C to 80 °C
  • Pressure range: -0,95 … 12 bar up to 60 °C
PUSHIN-FITTING-4

M5 Push-In Fitting for the AMS 301x Series

  • Suitable for plastic hoses with ∅OD = 4 mm
  • Temperature range: -10 °C to 80 °C
  • Pressure range: -0,95 … 12 bar up to 60 °C
PUSHIN-FITTING-6

M5 Push-In Fitting for the AMS 301x Series

  • Suitable for plastic hoses with ∅OD = 6 mm
  • Temperature range: -10 °C to 80 °C
  • Pressure range: -0,95 … 12 bar up to 60 °C

 

 

Connector Cables for Pressure Transmitters

For the AMS 3011, AMS 3012, AMS 4710, AMS 4711 and AMS 4712 transmitter series an electric connector cable is required for operation. We offer a cable with a matching M5 sensor connector, which ends in three individual cable strands. Please refer to the respective transmitter data sheet for the colour coding of the wires.

Order Number Product
M5-CABLE

Connector cable for the AMS 301x and AMS 471x Series

  • with M5 sensor connector (female)
  • Length: 2 m
  • 3 wires, wire colors: brown, blue, black